Remove existing coatings (for thick coatings, use a 16- or 20-grit diamond abrasive or more aggressive tool specifically for coating removal, such as a T-RexTM). Seal cracks and joints with an epoxy or other semi-rigid filler. Grind with a 30- or 40-grit metal-bonded diamond. Grind with an 80-grit metal-bonded diamond. Grind with a 150-grit metal-bonded diamond (or finer, if desired). Apply a chem...

There is different process in stone production, starting from quarry block sawing, block cutting to slab or tiles, stone polishing and then again stone cutting or engineering to finished products. Today we will discuss a polishing process in stone production. Normally stone polishing starts with a calibration or rough grinding and then comes to find grinding and coarse polishing and fine polishing...

Here we would like to introduce our new diamond grinding disc for the customers. The design of this granite diamond disc is quite different from the traditional iron disc, the following are the advantages that it has. 1)Good sharpness and excellent grinding 2)Long life, usually 3 times of life of traditional iron discs 3)Low price and cost-effective, polishing cost per square meter can be saved by...

Diamond tools are not the same as other tools. There are certain difficulties in operation. It requires us to be careful when using them. The following points will help you understand what diamond tools should be paid attention to when using them. 1. Before using a new diamond tool, it should be withdrawn from the last trimmed feed. Many brittle diamond tools are suspected to be damaged during ini...